Samson has definitely launched with a lot of problems: performance issues, cloud saves and frame gen not working on some devices, and plenty more the developers have already said they're addressing. I wanted to see how it performs on the ROG Xbox Ally X on launch day, in case anybody is jumping in, so I stuck with 25W and looked at 1080p, 900p and 720p with the settings I'm using for now.
- Steam version in Xbox mode, 25W, FSR Balanced.
- At 1080p on the balanced preset I've seen anywhere from about 25–26 up to 50 FPS without frame gen, depending on the area.
- Turning off hair and cloth simulation and using a custom performance/balanced mix brought my test spot from 28 to over 30.
- 900p adds about 3–5 FPS with the same settings; 720p gets you a bit more on the smaller screen.
- FSR frame gen works pretty well here, with a little input latency. With it on at 900p the overlay read about 51–62.
What I tested
I started at 1080p, FSR Balanced and the balanced overall preset, with motion blur, depth of field and film grain off, V-sync off and the frame rate unlimited. Then I tried a few changes:
- FSR Performance doesn't gain a lot, maybe two or three FPS here or there, and you lose more image quality, especially in motion.
- The performance preset brings the graphics down a good bit without gaining that much, a couple of FPS here and there.
- Turning off hair and cloth simulation brings back two or three FPS, and I think that's worth it. I leave animations at medium.
Here's where I ended up, and I've pretty much been able to leave it this way. Scale it up for visuals or down for frame rate as you like.
- ROG Xbox Ally X, Xbox mode, Steam version, 25W
- FSR Balanced, frame gen off (or on, see below)
- Textures quality, anti-aliasing quality, global illumination balanced, everything else performance
- Hair and cloth simulation off, animation medium
- Motion blur, depth of field and film grain off, V-sync off, frame rate unlimited
1080p
Performance is pretty rough at 1080p. On the balanced preset with FSR Balanced, the overlay read 27 to 30 FPS in my test spot. With the custom settings above, even with a few settings bumped up, it came up over 30 from the 28 we were at, and the overlay read 33 to 38 there. I think the game ends up looking okay this way, for the way we have to run it.

Frame gen is worth a look in this game. It feels pretty decent and does a good enough job of adding performance. There's a little bit of input latency, but I thought they did a pretty decent job considering the state of the game at launch. At 1080p with the custom settings it read about 49 to 53 on the overlay.

900p and 720p
I think you'll do a bit better coming down to 900p for now. With the same settings it does pretty well and brings another three to five FPS over what we'd already gained. Or go to 720p on the smaller screen if you want to get more out of it and adjust some settings. In the 900p gameplay across different areas and missions, the overlay mostly read the low to mid 30s, sometimes the low 40s, with a dip to 24. With frame gen on at 900p it read about 51 to 62.



Verdict
It's "playable" on the Xbox Ally X. It might not be the best-looking thing, you might have to mess around with it a bit, and I've noticed it runs differently depending on the day and night cycle and where you are. Ultimately I think you can get away with playing it on here, and it's much better than what we were dealing with on the Steam Deck. The game still has a lot of patches, performance optimizations and bug fixes to work through, so keep that in mind if you're jumping in day one. For comparison, see Samson on the MSI Claw 8 AI+ and Samson on the Steam Deck OLED.
FAQ
What FPS does Samson get on the ROG Xbox Ally X?
At 25W with FSR Balanced, 1080p ran anywhere from about 25 to 50 FPS depending on the area. 900p with the custom settings mostly read the low to mid 30s on the overlay, and 720p about 41 to 44 in the settings check spot.
Does frame gen work in Samson on the Xbox Ally X?
Yes. FSR frame gen works pretty well, with a little input latency. At 900p it read about 51 to 62 on the overlay.
Which settings help most?
Turning off hair and cloth simulation brought back two or three FPS. FSR Performance and the performance preset didn't gain much.
Want more handheld tests?
New Steam Deck, ROG Ally, Legion Go and Steam Machine performance videos every week.